Furuno GP-3500F - Manual (Page 138)

9. CUSTOMIZING YOUR UNIT
9-24
9.5.2 Remote controller (option) setup
The keys of the optional remote controller can be programmed as below.
1. Press the [MENU] key to show the main menu.
2. Press the [0] key to show the SYSTEM SETUP menu.
3. Press the [3] key to show the PROGRAMMABLE KEYS & REMOTE
CONTROLLER SETUP menu.
4. Rotate the [ENTER] knob to select a key No. of the remote controller.
For key location, refer to the figure in the menu.
The PROGRAMMABLE FUNCTIONS LIST FOR REMOTE CONTROLLER
menu appears.
0-3. PROGRAMMABLE FUNCTION LIST FOR REMOTE CONTROLLER 1/2
NEXT PAGE
SAVE/MOB KEY
WAYPOINT KEY
GOTO KEY
DISPLAY MODE KEY
RANGE - ZOOM IN
RANGE - ZOOM OUT
CLEAR KEY
MARK 1
MARK 2
MARK 3
MARK 4
MARK 5
MARK 6
MARK 7
MARK 8
MARK 9
MARK 0
MARK COLOR KEY
VRM KEY
TRCK COLOR KEY
CURSOR KEY
SHIP'S CENTER KEY
PLOT INTERVAL KEY
TURN KNOB TO SELECT MENU AND PRESS KNOB TO ENTER.
ZOOM IN: PREVIOUS PAGE ZOOM OUT: NEXT PAGE
0-3. PROGRAMMABLE FUNCTION LIST FOR REMOTE CONTROLLER 2/2
PREVIOUS PAGE
TURN KNOB TO RIGHT
TURN KNOB TO LEFT
PRESS KNOB TO ENTER
TRACKBALL - RIGHT
TRACKBALL - LEFT
TRACKBALL - UP
TRACKBALL -DOWN
TURN KNOB TO SELECT MENU AND PRESS KNOB TO ENTER.
ZOOM IN: PREVIOUS PAGE ZOOM OUT: NEXT PAGE
Press the
[ZOOM IN]
or
[ZOOM OUT]
key
Programmable functions list for remote controller menu
5. Rotate the [ENTER] knob to select a function, and then press the [ENTER]
knob.
6. Press the [MENU] key several times to close the menu.
7. Write the selected function name on the label supplied with the remote
controller.
8. Attach the label to the remote controller.