Furuno GP-3500F User Manual
Page 103
7. NAVIGATION
7-9
Entering waypoint name
This method is available only for waypoints having numeric names.
1. Press the [CURSOR ON/OFF] key to turn off the cursor.
2. Press the [GOTO] key to show the following window.
ENTER APPROPRIATE WAYPOINT NUMBER BY NUMERIC KEYS TO SET
THE DESTINATION. OR TURN KNOB TO SELECT THE WAYPOINT ON
THE HISTORY LIST AND PRESS KNOB TO SETUP.
WAYPOINT
COMMENT
000005 POINT B
000004 03:29 0301.02
000003 00:20 0301.02
000002
POINT A
000001
00:29 0301.02
GOTO WAYPOINT 00000
0
History list
Last-entered waypoint
Destination window
Note: This window will disappear automatically if there is no key operation
within 10 seconds.
3.
Press the numeric keys to enter a waypoint name at the GOTO WAYPOINT
line.
Each press of the numeric key changes the cursor position to the left digit.
Note: Press the [CLEAR] key to change the waypoint name to “000000.”
4. Press the [ENTER] knob.
A light-blue line runs between destination selected and own ship’s position.
Arrows on the line show the direction to follow. Range and bearing from own
ship’s position to destination appear at the top of the screen.