Furuno GP-3500F - Manual (Page 104)

7. NAVIGATION
7-10
7.3 Following a Route
Setting a route as destination
1. Press the [MENU] key to show the main menu.
2. Press the [2] key to show the ROUTES LIST.
3. Rotate the [ENTER] knob to select a route.
4. Press the [CURSOR ON/OFF] key to switch the direction to follow if
necessary.
FOLLOW: Follow a route in normal order.
REVERSE: Follow a route in reverse order.
Each press of the [CURSOR ON/OFF] key switches “FOLLOW” and “REVERSE”
at the top of the list.
5. Press the [GOTO] key.
The selected route is set as destination, and "FOLLOW" or "REVERSE" appears
in the far right-hand column.
Destination route
2. ROUTE LIST DIR: REVERSE 1/1
ROUTE NAME COMMENT GOTO
0 0 0 0 0 1
_ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Use the [CURSOR ON/OFF] key
to choose direction to follow route,
REVERSE and FOLLOW.
Route list
6. Press the [MENU] key several times to close the menu.
A light-blue line runs between the first waypoint and own ship’s position, and
green lines connect other route waypoints. Arrows on the line show the direction
to follow. Range and bearing from own ship’s position to destination appear at
the top of the screen.