Furuno GP-3500F User Manual

Page 148

Text mode
Original mode

9. CUSTOMIZING YOUR UNIT

9-34

NMEA FORMAT

Select NMEA0183 version 1.5 or 2.0 depending on the navigator connected.

TLL OUTPUT

Select ON to output L/L data to the navigator connected at the moment a mark is
entered.

L/L FORMAT

Selects the number of minute places to shown in latitude and longitude position,
from hundredth, thousandth or ten thousandth.

OUTPUT DESTINATION

Select ON to output the WPT sentence to the navigator connected when setting
a route as destination.

SELECT OUTPUT SENTENCE

Selects sentences to output.

1. Rotate the [ENTER] knob to select SELECT OUTPUT SENTENCE.
2. Press the [1] key to select “1. ON” to show the NMEA SENTENCES LIST.
3. Rotate the [ENTER] knob to select a sentence.
4. Press the [ENTER] knob to display ON or OFF as appropriate.
5. Repeat step 3 and 4 for other sentences.
6. Press [MENU] key to return to I/O PORT SETUP menu.