Furuno GP-1650WDF User Manual

Furuno GPS receiver

COLOR DGPS/PLOTTER/SOUNDER
COLOR GPS/PLOTTER/SOUNDER

GP-1650WDF, GP-1650WF FURUNO/NAVIONICS
GP-1650WDF, GP-1650WF FURUNO/C-MAP NT

This manual is related to the following products:

NAVIONICS GP-1650WDF NAVIONICS GP-1650WF GP-1650WF

Table of contents

Document Outline

SAFETY INSTRUCTIONS
TABLE OF CONTENTS
FOREWORD
SYSTEM CONFIGURATION
WHAT IS WAAS?
1. OPERATIONAL OVERVIEW
- 1.1 Display Unit Controls
- 1.2 Inserting Mini Chart Card
- 1.3 Turning the Power On/Off
- 1.4 Adjusting Tone and Brilliance
- 1.5 Plotter Displays
- 1.6 Sounder Displays
- 1.7 Menu Operation, Soft Keys
- 1.8 Demonstration Display
2. VIDEO SOUNDER OPERATION
- 2.1 Principle of Operation
- 2.2 Sounder Display Description
- 2.3 Dual-frequency Display
- 2.4 Plotter/Sounder Display
- 2.5 Automatic Sounder Operation
- 2.6 Manual Sounder Operation
- 2.7 Measuring Depth
- 2.8 Suppressing Interference
- 2.9 Suppressing Low Level Noise
- 2.10 Erasing Weak Echoes
- 2.11 White Marker
- 2.12 Selecting Picture Advance Speed
- 2.13 Selecting Background and Echo Colors
- 2.14 Alarms
- 2.15 Interpreting the Display
3. PLOTTER DISPLAYS
- 3.1 Presentation Modes
- 3.2 Cursor
- 3.3 Shifting the Display
- 3.4 Displaying Nav Information Window
- 3.5 Selecting Chart Scale/Range
- 3.6 Mini Chart Cards
- 3.7 Navigation Data Display
- 3.8 Steering Display
- 3.9 Highway Display
- 3.10 Changing Operation Mode
- 3.11 Navigation Trip Distance
4. TRACK
- 4.1 Displaying Track
- 4.2 Stopping/Restarting Plotting of Track
- 4.3 Changing Track Color
- 4.4 Track Plotting Method, Interval
- 4.5 Changing Track Memory Capacity
- 4.6 Erasing Tracks
5. MARK
- 5.1 Entering Marks
- 5.2 Changing Mark Attributes
- 5.3 Changing Mark Size
- 5.4 Erasing Marks
- 5.5 Displaying Track and Mark Points
- 5.6 Target Mark
6. WAYPOINTS
- 6.1 Entering Waypoints
- 6.2 Erasing Individual Waypoints
- 6.3 Changing Waypoint Data
- 6.4 Changing Waypoint Position on the Plotter Display
- 6.5 Waypoint Mark Size
- 6.6 Searching Waypoints
7. ROUTES
- 7.1 Entering Routes
- 7.2 Connecting Routes
- 7.3 Inserting, Removing Waypoints
- 7.4 Creating Track-based Routes
- 7.5 Erasing Routes
8. NAVIGATION
- 8.1 Navigating to “Quick Points”
- 8.2 Navigating to Waypoints (waypoint list)
- 8.3 Navigating to Ports, Port Services
- 8.4 Following a Route
- 8.5 Canceling Navigation
9. PLOTTER ALARMS
- 9.1 Introduction
- 9.2 Audio Alarm On/Off
- 9.3 Arrival Alarm
- 9.4 Anchor Watch Alarm
- 9.5 XTE (Cross Track Error) Alarm
- 9.6 Speed Alarm
- 9.7 Proximity Alarm
- 9.8 Alarm Information
10. MEMORY CARD OPERATIONS
- 10.1 Formatting Memory Cards
- 10.2 Saving Data to Memory Card
- 10.3 Loading Data from Memory Card
11. CUSTOMIZING YOUR UNIT
- 11.1 CHART SETUP OPTIONS menu
- 11.2 DISPLAY OPTIONS menu
- 11.3 GPS/DGPS/TD OPTIONS menu
- 11.4 SOUNDER SETUP OPTIONS menu
- 11.5 CONFIGURATION menu
12. USING C-MAP NT MODEL
- 12.1 Inserting Chart Card
- 12.2 Cursor and Data Display
- 12.3 Tidal Information
- 12.4 Navigating to Ports, Port Services
- 12.5 Setting Chart Setup Options
- 12.6 Selecting Chart Scale/Range
- 12.7 Displaying Program Number
13. MAINTENANCE & TROUBLESHOOTING
- 13.1 Maintenance
- 13.2 Replacement of Fuse, Battery
- 13.3 Simple Troubleshooting
- 13.4 Error Messages
- 13.5 Diagnostic Tests
- 13.6 Clearing Memories
APPENDIX
- MENU TREE
- LORAN C CHAINS
- DECCA CHAINS
- WORLD TIME
- GEODETIC CHART LIST
SPECIFICATIONS
INDEX