Furuno GP-3500F - Manual (Page 21)

1. BASIC OPERATION
1-11
DISPLAY MODE PAGE 1/4
TURN KNOB TO SELECT DISPLAY MODE AND PRESS KNOB TO ENTER.
OR PRESS APPROPRIATE NUMERIC KEY TO SELECT DISPLAY MODE.
PRESS "0" KEY TO GOTO PAGE 2.
2. PILOT
NAV INFO 2 3. PLOTTER
E/S DUAL
4. PLOTTER
E/S 50 kHz 5. PLOTTER
E/S 200 k 6. E/S DUAL
7. E/S 50 kHz
SINGLE 8. E/S 200 k
SINGLE 9. E/S 200 k
BTTM Lock
1. PLOTTER
NAV INFO 1
0. GO TO PAGE 2.
DISPLAY MODE PAGE 2/4
TURN KNOB TO SELECT DISPLAY MODE AND PRESS KNOB TO ENTER.
OR PRESS APPROPRIATE NUMERIC KEY TO SELECT DISPLAY MODE.
PRESS "0" KEY TO GOTO PAGE 3.
0. GO TO PAGE 3
[0] Key
1. E/S DUAL 2. E/S 50 kHz
SINGLE 3. E/S 50 Hz
MRKR Zoom
6. 50 kHz
DSCRMMNATN 4. E/S 50 kHz
BTTM Zoom 5. E/S 50 kHz
BTTM Lock
7. NAV INFO 1
E/S 50 kHz 8. PLOTTER
E/S 50 kHz 9. E/S 50 kHz
A-SCOPE
[0] key
DISPLAY MODE PAGE 3/4
TURN KNOB TO SELECT DISPLAY MODE AND PRESS KNOB TO ENTER.
OR PRESS APPROPRIATE NUMERIC KEY TO SELECT DISPLAY MODE.
PRESS "0" KEY TO GOTO PAGE 4.
0. GO TO PAGE 4
7. NAV INFO 1
E/S 200 k 8. PLOTTER
E/S 200 k 9. E/S 200 k
A-SCOPE
1. E/S DUAL 2. E/S 200 k
SINGLE 3. E/S 200 k
MRKR Zoom
6. E/S 200 k
DSCRMNATN 4. E/S 200 k
BTTM Zoom 5. E/S 200 k
BTTM Lock
[0] key
DISPLAY MODE PAGE 4/4
TURN KNOB TO SELECT DISPLAY MODE AND PRESS KNOB TO ENTER.
OR PRESS APPROPRIATE NUMERIC KEY TO SELECT DISPLAY MODE.
PRESS "0" KEY TO GOTO PAGE 1.
0. GO TO PAGE 1
7. E/S DUAL 8. COMPASS
PLOTTER 9. GPS STATUS
[0] key
1. PLOTTER 2. PLOTTER
NAV INFO 1 3. PLOTTER
NAV INFO 2
6. PILOT
NAV INFO 2 4. PILOT 5. PILOT
NAV INFO 1
DISPLAY MODE screen
3. Press appropriate numeric key to choose a display.
Selected display replaces display mode page.
Note: The DISPLAY MODE screens can store a total of 36 displays, nine on
each of four pages. You may program the DISPLAY MODE screens as
desired. For further derails, see paragraph 9.6.1 for plotter displays and
paragraph 11.17 for sounder displays.