Furuno GP-3500F User Manual
Page 136
9. CUSTOMIZING YOUR UNIT
9-22
0-3. PROGRAMMABLE KEYS & REMOTE CONTROLLER SETUP
PROGRAMMABLE KEYS SETUP
WAYPOINTS LIST
SHIFT KEY SETUP
E/S SHIFT
RANGE KEY SETUP
E/S RANGE
GAIN KEY SETUP
E/S GAIN
VRM KEY SETUP
VRM
REMOTE CONTROLLER KEY SETUP
SAVE/MOB KEY
REMOTE CONTROLLER KEY 2 SETUP
PRES KNOB TO ENTER
REMOTE CONTROLLER KEY 3 SETUP
CLEAR KEY
REMOTE CONTROLLER KEY 4 SETUP
MARK 1
REMOTE CONTROLLER KEY 5 SETUP
RANGE - ZOOM IN
REMOTE CONTROLLER KEY 6 SETUP
RANGE - ZOOM OUT
TURN KNOB TO SELECT MENU AND PRESS KNOB TO ENTER.
REMOTE CONTROLLER
1
2
3
4
5
6
Programmable key & remote controller setup menu
4. Rotate the [ENTER] knob to select the item (key) you want to change, and
then press the [ENTER] knob.
When changing the function of the [PROG] key, for example, select
PROGRAMMABLE KEYS SETUP.
The PROGRAMMABLE FUNCTION LIST appears (shown on the next page).
This list has two pages, page 1 for plotter functions and page 2 for echo sounder
functions. For echo sounder functions, see paragraph 11.16.
5. If page 2 appears, rotate the [ENTER] knob to select PREVIOUS PAGE.
You can change pages by pressing the [ZOOM IN] key (page 1) and [ZOOM
OUT] key (page 2).
6. Rotate the [ENTER] knob to choose a function and press the [ENTER] knob.
The selected function appears in the menu.
7. Press the [MENU] key several times to close the menu.
The next page shows the menu items and functions.