Furuno GP-3500F User Manual

Furuno GPS receiver

Table of contents

Document Outline

COVER
SAFETY INSTRUCTIONS
FOREWORD
TABLE OF CONTENTS
SYSTEM CONFIGURATION
1. BASIC OPERATION
- 1.1 Controls Description
- 1.2 Loading a Mini Chart Card
- 1.3 Turning the Power On/Off
- 1.4 Adjusting Brilliance and Hue
- 1.5 Selecting a Display
- 1.6 MOB Mark
- 1.7 Using PROG Key
- 1.8 Simulation Mode
- 1.9 Menu Overview
2. PLOTTER AND PILOT DISPLAY DESCRIPTION
- 2.1 Plotter and Pilot Displays
- 2.2 Operating the Cursor
- 2.3 Shifting the Display
- 2.4 Changing Chart Scale
- 2.5 Measuring Range and Bearing Between two Points
- 2.6 Using the VRM (Variable Range Marker)
- 2.7 Mini Chart Cards
3. TRACK
- 3.1 Displaying Track
- 3.2 Stopping, Restarting Plotting of Own Ship Track
- 3.3 Changing Track Color
- 3.4 Changing Track Line Type
- 3.5 Track Plotting Method, Interval
- 3.6 Erasing Tracks
- 3.7 Editing Tracks
- 3.8 Changing Track Memory Capacity
4. MARKS & LINES
- 4.1 Entering Marks
- 4.2 Changing Mark Color
- 4.3 Changing Mark Size
- 4.4 Entering Lines
- 4.5 Selecting Line Type
- 4.6 Erasing Marks, Lines
- 4.7 Editing Marks, Lines
- 4.8 Displaying Mark Data
- 4.9 Target Mark (TLL)
5. WAYPOINT
- 5.1 Entering Waypoints
- 5.2 Editing Waypoint Data
- 5.3 Erasing Individual Waypoints
- 5.4 Searching Waypoints
- 5.5 Setting Ship’s Speed for TTG
- 5.6 Displaying Waypoint Data
- 5.7 Changing Waypoint Mark Size
6. ROUTE
- 6.1 Entering Routes
- 6.2 Editing Routes
- 6.3 Erasing Routes
- 6.4 Setting Ship’s Speed for TTG
7. NAVIGATION
- 7.1 Navigating to Quick Points
- 7.2 Navigating to a Waypoint
- 7.3 Following a Route
- 7.4 Canceling Navigation
8. ALARMS
- 8.1 Audio Alarm On/Off
- 8.2 Arrival Alarm/Anchor Watch Alarm
- 8.3 XTE (Cross Track Error) Alarm/Border Alarm
- 8.4 Proximity Alarm
- 8.5 Speed Alarm
- 8.6 Trip Log Alarm
- 8.7 Temperature Alarm
- 8.8 Shear Alarm
- 8.9 Bottom Alarm
9. CUSTOMIZING YOUR UNIT
- 9.1 CHART SETUP Menu
- 9.2 PLOTTER SETUP Menu
- 9.3 DISPLAY SETUP Menu
- 9.4 NAVIGATOR SETUP Menu
- 9.5 PROGRAMMABLE KEYS & REMOTE CONTROLLER SETUP Menu
- 9.6 DISPLAY MODES & NAV DATA WINDOW SETUP Menu
- 9.7 I/O PORT SETUP Menu
- 9.8 TEST & MEMORY CLEAR Menu
10. RECORDING & PLAYING BACK DATA
- 10.1 Recording Data
- 10.2 Memory Card Operation
- 10.3 Automatic Backup Function
- 10.4 Internal Memory
- 10.5 Uploading, Downloading Data
11. VIDEO SOUNDER OPERATION
- 11.1 Principle of Operation
- 11.2 Sounder Displays
- 11.3 Automatic Sounder Operation
- 11.4 Manual Sounder Operation
- 11.5 Measuring Depth, Time
- 11.6 Entering Mark on the Display
- 11.7 Reducing Interference
- 11.8 Reducing Low-Level Noise
- 11.9 White Marker
- 11.10 Display Colors
- 11.11 Customizing Colors
- 11.12 Erasing Weak Echoes
- 11.13 Picture Advance Speed
- 11.14 Reviewing Past Picture
- 11.15 Alarms
- 11.16 Programmable Key Setup
- 11.17 Setting the DISPLAY MODE Screen
- 11.18 ECHO SOUNDER SYSTEM SETUP Menu
- 11.19 ECHO SOUNDER RANGE SETUP Menu
- 11.20 Interpreting the Sounder Display
12. MAINTENANCE & TROUBLESHOOTING
- 12.1 Maintenance
- 12.2 Replacement of Fuse
- 12.3 Replacement of Battery
- 12.4 Trackball Maintenance
- 12.5 Simple Troubleshooting
- 12.6 Diagnostics
- 12.7 Clearing the Working Memory
- 12.8 Cold Start
MENU TREE
WORLD TIME CHART
GEODETIC CHART LIST
ICONS
WHAT IS WAAS?
SPECIFICATIONS
INDEX
Declaration of Conformity