Furuno GP-3500F - Manual (Page 203)

11. VIDEO SOUNDER OPERATION
11-31
11.16 Programmable Key Setup
The programmable key ([PROG] key) provides one-touch execution of desired
function. Also, the [SHIFT], [RANGE], [GAIN] and [VRM] keys can be
programmed for other functions. The default programs for these keys settings
are as shown in the table below.
Key label Functions
PROG Shows the WAYPOINTS LIST.
SHIFT Shows E/S SHIFT window.
RANGE Shows E/S RANGE window.
GAIN Shows E/S GAIN window.
VRM Use the VRM function. (only when the menu is not shown.)
If the above settings are not to your liking, you may change them as below.
1. Press the [MENU] key to show the main menu.
2. Press the [0] key to show the SYSTEM SETUP menu.
3. Press the [3] key to show the PROGRAMMABLE KEYS & REMOTE
CONTROLLER SETUP menu.
4. Rotate the [ENTER] knob to select the key name you want to change the
function, and then press the [ENTER] knob.
If you want to change the function of the [PROG] key, for example, select
“PROGRAMMABLE KEYS SETUP.” The PROGRAMMABLE FUNCTIONS LIST
appears.
0-3. PROGRAMMABLE FUNCTIONS LIST 2/2
PREVIOUS PAGE
E/S SHIFT
E/S RANGE
E/S GAIN
E/S AUTO MODE
E/S NOISE LIMITER
E/S CLUTTER
E/S WHITE MARKER
E/S HUE
E/S SIGNAL LEVEL
E/SPICTURE ADV
TURN KNOB TO SELECT MENU AND PRESS KNOB TO ENTER.
ZOOM IN: PREVIOUS PAGE ZOOM OUT: NEXT PAGE
Programmable functions list
5. If page 1/2 appears, rotate the [ENTER] knob clockwise to select NEXT
PAGE.