Furuno GP-3300 User Manual

Furuno GPS receiver

This manual is related to the following products:

GD-3300

Table of contents

Document Outline

SAFETY INSTRUCTIONS
TABLE OF CONTENTS
FOREWORD
MENU TREE
SYSTEM CONFIGURATION
OPERATIONAL OVERVIEW
- 1.1 Control Description
- 1.2 Inserting Chart Cards
- 1.3 Turning the Power On/Off
- 1.4 The Trackball
- 1.5 The Cursor
- 1.6 Shifting the Display
- 1.7 Returning Own Ship Marker to Screen Center
- 1.8 Selecting Screen Center by Cursor Position
- 1.9 Chart Scale
- 1.10 Display Brilliance and Key Backlighting
- 1.11 Card Drives, Chart Cards
- 1.12 The Data Window
- 1.13 Display Modes
- 1.14 Menu Operation
- 1.15 Operation on the Display
- 1.16 Operational Status Icons
- 1.17 Economy Mode
- 1.18 Plot Mode Displays
- 1.19 Setting the Time and Date
TRACK
- 2.1 Stopping Track Recording
- 2.2 Track Color
- 2.3 Changing Color, Appearance of Specific Track
- 2.4 Deleting Track
- 2.5 Track Plotting Interval
- 2.6 Customizing the Hold Function
- 2.7 Customizing the PLOT INTVL Key
MARKS, LINES
- 3.1 Entering Marks
- 3.2 Changing Current Mark Color
- 3.3 Changing Shape, Color of Specific Marks
- 3.4 Deleting Marks
- 3.5 External Event Mark
- 3.6 Target Mark
- 3.7 Lines
WAYPOINTS
- 4.1 Entering Waypoints
- 4.2 Entering a Comment for a Waypoint
- 4.3 Turning Specific Waypoint Displays On/Off
- 4.4 Deleting Waypoints
- 4.5 Destination Waypoint
- 4.6 Cancelling Destination Waypoint
ROUTE NAVIGATION
- 5.1 Creating Routes
- 5.2 Following a Route
- 5.3 Temporarily Deselecting a Route Waypoint
- 5.4 Deleting Route Waypoints
- 5.5 Cancelling Route Navigation
- 5.6 Route Calculation
ALARMS
- 6.1 Arrival Alarm, Anchor Watch Alarm
- 6.2 XTE Alarm, Border Alarm
- 6.3 Ship's Speed Alarm
- 6.4 When the Alarm Buzzer Sounds...
VIDEO PILOT DISPLAY, NAVIGATION DATA DISPLAY
- 7.1 Video Pilot Display
- 7.2 Navigation Data Display
AUTOPILOT DATA
- 8.1 Features Available with Autopilot Connection
- 8.2 Autopilot Information on Plot Display
- 8.3 Autopilot Information on Video Pilot Display
MEMORY CARD OPERATIONS
- 9.1 Formatting Memory Cards
- 9.2 Saving Data to Memory Cards
- 9.3 Playing Back Memory Cards
- 9.4 Saving, Playing Back Initial Settings
- 9.5 Editing Memory Cards
GPS RECEIVER OPERATION (GP-3300)
- 10.1 GPS Information on the Navigation Data Display
- 10.2 GPS and DGPS Initial Settings
- 10.3 Satellite Force Health/Deselection
- 10.4 GPS Smoothing
- 10.5 Cold Start
- 10.6 Geodetic Datum
- 10.7 Correcting GPS Position
OTHER FUNCTIONS
- 11.1 Displaying Position in Loran TDs
- 11.2 Bearing Display Reference
- 11.3 Magnetic Deviation
- 11.4 Changing Chart Appearance
- 11.5 Correcting Chart Position
- 11.6 Loran TD Correction
- 11.7 Calculating R/B Between Two Points
- 11.8 Locking Preferred Settings
- 11.9 Memory Capacity
- 11.10 Apportioning the Memory
- 11.11 Reading Number of Track, Marks Used
- 11.12 Smoothing
- 11.13 Selecting Navaid
- 11.14 Track, Mark and Marker Attributes
- 11.15 Chart Symbols, Contour Lines Attributes
MAINTENANCE & TROUBLESHOOTING
- 12.1 Preventive Maintenance
- 12.2 Diagnostic Tests
- 12.3 Error Messages
- 12.4 Replacement of Fuse
- 12.5 Replacement of Batteries
- 12.6 Verifying Program Version No.
- 12.7 Troubleshooting Table
- 12.8 Clearing Memories
APPENDIX
- Time Differences
- Geodetic Chart List
SPECIFICATIONS
INDEX
Declation of Conformity