Fortinet FortiLog-400 User Manual
Page 93
FortiLog CLI reference
CLI commands
FortiLog Administration Guide
05-16000-0082-20050115
93
get report resolve
Display the settings (what is turned on) for resolving host and service
names.
get report aliases
Display a list of IP aliases and their IP address.
get log client
Display the FortiGate units connected to the FortiLog unit.
get log elog
Display event logs.
get log logsetting
Display log settings.
get log query
Display log queries.
get log report
Display a matrix of all set reports.
get log report name
Display information on a specific report name.
get log report querysets
Display information on the queries set for each report.
get log report devicesets
Display information on the devices sets for each report.
get log report filters
Display the information on the filtering options for the reports.
get log report schedules
Display the scheduling information for the reports.
get log report outputs
Display the output options for the reports.
get log raid
Display RAID levels.
get log policy destination {syslog | local |
console}
Display log policies of the remote syslog server, the FortiLog hard disk, or
the console.
get log policy destination event
Display log policy event setting of the selected destination.
get system status
Display system status.
get system serialno
Display the FortiLog unit serial number.
get system performance
Display the FortiLog unit system performance, including CPU, memory, and
if the system is up.
get system interface
Display port1 interface information.
get system dns
Display domain name server configuration.
get system brctl
Display system interface information and MAC address.
get system route table
Display system route table information, including table number, destination,
gateway, and interface.
get system time time
Display current system time.
get system time ntp
Display NTP server name and information.
get system session_ttl
Display the idle time length for a session.
get system option
Display system options, including system idle timeout, authentication
timeout, and language for the web-base manager.
get system mainregpage
Display main registration message.
get system admin
Display admin user information.