Defining device port interfaces – Fortinet FortiLog-400 User Manual
Page 27
Connecting to the FortiLog Unit
Configuring the FortiLog unit
FortiLog Administration Guide
05-16000-0082-20050115
27
3
Enter a device name.
For a FortiGate device, this is the same entry as entered as the Local ID set in the
Log&Config settings for FortiLog. For example, FGT-500A.
4
Select a group to add the device to if desired. For details on creating a group see
“Creating Device Groups” on page 28
.
5
For Secure Connection, select Yes.
If you select secure connection between the FortiLog unit and the FortiGate unit, the
device name must match the local ID you entered on the FortiGate unit. For
information about how to configure the FortiGate unit, see
“Configuring FortiGate devices running FortiOS 2.5” on
6
If you select Secure connection, enter the Pre-shared Key. The preshared key must
be the same as what you entered on the device. You must enter the key in the exact
same way including upper and lower case.
7
Enter the Allocated Disk Space. Set disk quota from 0 to 4000 MB. A disk quota of 0 is
unlimited.
8
Enter the size limit for the log files.
9
For Max Logfile Age, enter the time limit for the FortiLog unit to keep the log files.
10
Select what the FortiLog unit should do when the allocated disk space for the
FortiGate device is used up.
11
When adding a FortiGate unit, expand the device Interface Specification to set the
default port settings for the device.
Define the port interface options using the arrow buttons. For details on port interface
settings see
“Defining device port interfaces” on page 27
.
If you want to add a VLAN or other interface, type the name of the interface and select
Add.
12
Select Apply.
Defining device port interfaces
FortiLog Network activity log reports include information on inbound and outbound
traffic flow. Traffic flow information is based on the source and destination interfaces
of the device and how they are configured to send and receive information.
To ensure that the traffic information is represented correctly in these reports, you
need to assign the FortiGate interfaces to an interface type. The device interface can
include an interface name or a defined VLAN on the device.