Fortinet FortiLog-400 - Manual (Page 18)

18
05-16000-0082-20050115 Fortinet Inc.
Connecting the FortiLog unit Setting up the FortiLog unit
Figure 6: FortiLog connection option
Connecting the FortiLog unit
You can install the FortiLog unit as a free-standing appliance on any stable surface.
You can mount the FortiLog-800 unit in a standard 19-inch rack. It requires 1 U of
vertical space in the rack.
To connect the FortiLog unit to the network
1 Place the unit on a stable surface.
2 If you have a FortiLog-800 unit, you can also mount it in a 19-inch rack. The units
require 1.5 inches (3.75 cm) clearance on each side to allow for cooling.
3 Make sure the power of the unit is turned off.
4 Connect the network cable to the LAN interface.
5 Connect the power cable to a power outlet.
6 Turn on the power switch.
Esc Enter Esc Enter Esc Enter
FortiGate unit FortiGate unit FortiGate unit
Esc Enter Esc Enter
Management PC
Esc Enter
FortiGate unit
Internet
Management PC
Internal Network
FortiLog unit
FortiGate units FortiMail unit
4
1 CONSOLE 2 PWE