Creating a device profile, Select filtering options – Fortinet FortiLog-400 User Manual
Page 61
Reports
Creating and generating a report
FortiLog Administration Guide
05-16000-0082-20050115
61
6
Select the group or individual devices to use in the report.
7
Select Apply.
Creating a device profile
You can save the selections as a device profile. After creating a device profile, you
can select the profile for use in other reports.
To create a device profile
1
Select New.
or
Start with an existing profile by selecting the profile and selecting Clone.
2
Enter a name for the profile and select OK.
3
Select the devices to include in the profile.
4
Select Apply.
Select filtering options
Filtering enables you to view or remove information from a report to provide a more
concise report. For example, you only want reports on specific error messages, or you
do not want include certain IP address destinations.
Figure 31: Filter options
To set the filtering on a log report
1
Go to Reports > Config.
2
Select a report from the list.
3
Select Filter.