Fortinet FortiLog-400 - Manual (Page 104)

104
05-16000-0082-20050115 Fortinet Inc.
CLI commands FortiLog CLI reference
set report
Use set report to configure the FortiLog report settings.
set system
Use set system to configure the FortiLog system settings.
Table 10: set report command architecture
set report
resolve
alias
hostnetrange
Commands Description
set report resolve Select Resolve IP Ports to Service Name to view the port number by its
service name. For example, display HTTP rather than port 80
set alias hostnetrange y.y.y.y/n> Set the alias name for the IP address of the host, network or the IP range.
Table 11: set system command architecture
set system
admin
username
password
permission {readonly |
readwrite}
trusthost
or
<0.0.0.0> for anyip
address
or
<0.0.0.0> for anynet
mask
status
disable>
dns
primary
{xxx.xxx.xxx.xxx |
none}
secondary
{xxx.xxx.xxx.xxx |
none}
hostname
interface
config allowaccess
ping
https
ssh
snmp
http
telnet