Creating a scan target profile – Fortinet FortiLog-400 User Manual
Page 70
70
05-16000-0082-20050115
Fortinet Inc.
Vulnerability reports
Reports
Figure 39: Selecting scan targets
To select the scan targets
1
Go to Reports > Config > Vulnerability.
2
Select a report from the list.
3
Select Scan Targets.
4
Select devices from the Available IP Aliases list.
5
Select the right arrow to move the device to the Selected IP Aliases list.
6
To add additional devices, select Create New, and repeat step 4 and 5.
7
Select Apply.
To add additional devices
1
Select Create New.
2
Enter a name of the host, network or IP address range in the Alias text box.
3
Enter the IP address of the host, network or the IP range.
4
Select OK.
5
Select the device from the Available IP Aliases list.
6
Select the right arrow to move the device to the Selected IP Aliases list.
7
Select Apply.
Creating a scan target profile
You can save the selections as a scan target profile. After creating a scan target
profile, you can select the profile for use in other vulnerability reports.
To create a scan target profile
1
Select New.
2
Enter a name for the profile and select OK.
3
Select the devices to include in the profile.