Fortinet FortiLog-400 - Manual (Page 103)

FortiLog CLI reference CLI commands
FortiLog Administration Guide 05-16000-0082-20050115
103
set NAS
Use set NAS to configure the FortiLog NAS server settings when using the FortiLog
unit in Passive mode.
Table 9: set NAS command architecture
set nas
protocol
nfs
share
workgroup
user
name>
uid name password
name password
group
name>
gid members
members
share
name>
path ro rw
rw
nfs
path ro rw
rw
Commands Description
set nas protocol {nfs | share} Set the FortiLog unit’s passive mode sharing to either Network File System or
windows sharing.
set nas protocol share workgroup
When using Windows sharing, set the workgroup name.
set nas user uid
name password
Set up a user to have access to file sharing by setting their user name, user ID
number, display name and password.
set nas user name
password
Set up a user to have access to file sharing by setting their user name, display name
and password.
set nas group gid
members Set up a user group to have access to file sharing by setting the group name, group
ID number and including members.
set nas group members
Set up a user group to have access to file sharing by setting the group name and
adding members.
set nas share path
Set a Windows share name and path to the shared directory.
set nas share path
{ro | rw } Set user permissions, either read only or read and write for a specified Windows
share name and path.
set nas share path
rw Set user read & write permissions for a specified Windows share name and path.
set nas nfs path Set a directory path for the network file system directory.
set nas nfs path {ro list> | rw } Set the users and their permissions, either read only or read and write for a specified
network file share path.
set nas nfs path rwlist> Set the user read & write permissions for a specified network file share path.