FUJITSU M3093DG User Manual
FUJITSU Scanners
Table of contents
Document Outline
- M3096GX/M3093GX/M3093DG IMAGE SCANNER OEM MANUAL
- REVISION RECORD
- CONTENTS
- CHAPTER 1GENERAL
- CHAPTER 2SPECIFICATIONS
- CHAPTER 3CONFIGURATION
- CHAPTER 4INTERFACE
- 4.1 Physical Specifications
- 4.2 SCSI Bus
- 4.3 Bus Phases
- 4.4 Commands
- 4.4.1 RESERVE UNIT command
- 4.4.2 RELEASE UNIT command
- 4.4.3 INQUIRY command
- 4.4.4 REQUEST SENSE command
- 4.4.5 SEND DIAGNOSTIC command
- 4.4.6 TEST UNIT READY command
- 4.4.7 SET WINDOW command
- 4.4.8 SET SUBWINDOW command
- 4.4.9 OBJECT POSITION command
- 4.4.10 SEND command
- 4.4.11 READ command
- 4.4.12 MODE SELECT (6)
- 4.4.13 MODE SENSE (6)
- 4.4.14 SCAN
- 4.5 Status: STATUS phase (target Æ initiator)
- 4.6 Messages
- 4.7 Command Sequence
- 4.7.1 Initial sequence
- 4.7.2 Command sequence to read
- 4.7.3 READ command sequence
- 4.7.3.1 Multiple read (M3096GX/M3093GX without CMP>2 option: disconnect disabled)
- 4.7.3.2 Multiple read (M3096GX/M3093GX without CMP>2 option: disconnect enabled)
- 4.7.3.3 Single read (M3096GX/M3093GX with CMP>2 option or M3093DG: disconnect disabled)
- 4.7.3.4 Single read (M3096GX/M3093GX with CPM>2 option or M3093DG: disconnect enabled)
- 4.7.3.5 Multiple read (M3096GX/M3093GX with CMP>2 option or M3093DG: disconnect disabled)
- 4.7.3.6 Multiple read (M3096GX/M3093GX with CMP>2 option or M3093DG: disconnect enabled)
- 4.8 Status Transition of Logical Unit
- 4.9 Error Table
- 4.10 Items for Specifying Window and Subwindow
- 4.11 Output Data for Gray Scale Read
- APPENDIX A PAPER SPECIFICATIONS
- APPENDIX B ADF SCANNING SPEED
- APPENDIX C DROP>OUT COLOR
- APPENDIX D DIFFERENCES BETWEEN THE M3096GX AND M3096G IMAGE SCANNERS
- APPENDIX E CHANGING PRODUCT IDENTIFICATION
- APPENDIX F WHITE LEVEL FOLLOWING ALGORITHM
- Reader Comment Form