FUJITSU M3093DG - Manual (Page 73)

- Implemented vendor unique parameter: Bytes 32 to 51
Of the vendor unique parameters defined by the SET WINDOW command, this
indicates only the supported parameter. The implemented vendor unique
parameter consist of of 16 fields, each consisting of two bytes. The bit location
of each field indicates the lower four bits of the vendor unique parameter code
(vendor unique ID) supported by the scanner.
Bytes Description
32, 33
34, 35
36, 37
38, 39
3A, 3B
3C, 3D
3E, 3F
40, 41
42, 43
44, 45
46, 47
48, 49
4A, 4B
4C, 4D
4E, 4F
50, 51 Vendor unique parameter - 0Xh
Vendor unique parameter - 1Xh
Vendor unique parameter - 2Xh
Vendor unique parameter - 3Xh
Vendor unique parameter - 4Xh
Vendor unique parameter - 5Xh
Vendor unique parameter - 6Xh
Vendor unique parameter - 7Xh
Vendor unique parameter - 8Xh
Vendor unique parameter - 9Xh
Vendor unique parameter - AXh
Vendor unique parameter - BXh
Vendor unique parameter - CXh
Vendor unique parameter - DXh
Vendor unique parameter - EXh
Vendor unique parameter - FXh
The scanner returns X'0001 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000'. (00 only)
- Image control function: Bytes 52 to 57
Indicates supplementary information for parameters defined in the SET
WINDOW command.
a) Brightness steps: Byte 52
Indicates the brightness level. X'00' indicates that the brightness function
is not supported. The scanner returns X'FF'.
b) Threshold steps: Byte 53
Indicates the threshold level. X'00' indicates that the threshold function is
not supported. The scanner returns X'FF'.
c) Contrast steps: Byte 54
Indicates the contrast level. X'00' indicates that the contrast function is not
supported. The scanner returns X'FF'.
d) Reserved: Byte 55
4 $ 41