FUJITSU M3093DG - Manual (Page 34)

SCSI ID: 0 to 7, variable by Digital switch: default is 5.
Logical unit number (LUN): 000, fixed
(2) Bus phases
All phases are supported.
(3) Commands
The following commands are supported by this scanner:
f INQUIRY
f OBJECT
POSITION
f MODE SELECT (6)
f MODE SENSE (6)
f READ
f RELEASE
UNIT
f REQUEST SENSE
f RESERVE UNIT
f SEND
f SEND DIAGNOSTIC
f SET SUBWINDOW
f SET WINDOW
f TEST UNIT READY
f SCAN
A control byte is not supported. If the value other than X©00π is specified, an error
is generated.
(4) Statuses
The following statuses are supported by this scanner:
f BUSY
f
CHECK CONDITION
f GOOD
f RESERVATION
CONFLICT
4 $ 2