FUJITSU M3093DG - Manual (Page 164)

4.8 Status Transition of Logical Unit
GOOD status
CHECK CONDITION status
Status transition Power ON
Reset
BUS DEVICE RESET message
INQUIRY command
UNIT ATTENTION status
REQUEST SENSE command
UNIT ATTENTION reported/cleared)
Range protected in reserved status
NOT READY status
NOT READY status
REQUEST SENSE
Command
(NOT READY reported)
Other command
Time to READY
Less than 60 seconds
Normal status
READY status: Waiting Other command
Reading
READ command
Scan completed
C. A. status
$ Hardware error
$ Abnormal command
$ Abnormal parameter
$ Medium error
C. A status
REQUEST SENSE command
(Error detail reported/cleared) Other command
(C. A. status released)
Other command
4 $ 132