FUJITSU M3093DG - Manual (Page 93)

(i) IMAGE COMPOSITION: Byte 19
Value (Hex) Image output
00 Line art (Binary image)
01 Halftone (Binary image)
02 Gray scale
03 to FF (Reserved)
If reserved value is specified, this scanner returns the following error
information as follows:
f Status: B©00001π (CHECK CONDITION)
f Sense key: X©5π (ILLEGAL REQUEST)
If the 02 is specified at M3093DG back>side reading, the scanner returns the
same error information as above.
(j) Bit per pixel: Byte 1A
Specifies the number of bits per pixel.
M3096GX/M3093GX or M3093DG simplex reading supports X©01π and
X©08π, and X©00π and X©02π to X©FFπ except for X©08π are reserved.
M3093DG duplex reading supports only X©01π, X©00π to X©FFπ except for
X©01π are reserved.
If reserved value is specified, this scanner returns the following error
information as follows:
f Status: B©00001π (CHECK CONDITION)
f Sense key: X©5π (ILLEGAL REQUEST)
(k) Halftone type: Byte 1B
Value (Hex) Halftone method
00 Default This scanner applies dither.
01 Dither
02 Error diffusion
03 to FF (Reserved)
If reserved value is specified, this scanner returns the following error
information as follows:
f Status: B©00001π (CHECK CONDITION)
4 $ 61