FUJITSU M3093DG - Manual (Page 97)

f
d pattern: Byte 29
Specifies the d pattern number for the line art or the halftone.
Value (Hex)
d pattern
00 Default This scanner applies ™Normal∫.
01 Normal
02 Soft
03 Sharp
04 to 7F (Reserved)
80 to 84 User down>load d pattern
85 to FF (Reserved)
If reserved value is specified, this scanner returns the following error
information as follows:
f Status: B©00001π (CHECK CONDITION)
f Sense key: X©5π (ILLEGAL REQUEST)
f Outline extraction: Byte 2A
Value (Hex) Meaning
00 Default This scanner not applies outline
extraction.
01 to 7F (Reserved)
80 Enable outline extraction. See note 1.
81 to FF (Reserved)
If reserved value is specified, this scanner returns the following error
information as follows:
f Status: B©00001π (CHECK CONDITION)
f Sense key: X©5π (ILLEGAL REQUEST)
Note 1: If IPC>2 or IPC>2D option is not provided, this scanner will
report as error.
4 $ 65