FUJITSU M3093DG - Manual (Page 91)

3. Conditions for vertical scanning:
1 e [YR ¥ L/1200] e 6912 (line) (M3096GX)
e 5600 (line) (M3093GX)
e 5600 (line) (M3093DE without option)
e 8400 (line) (M3093DE with memory option)
e 11200 (line) (M3093DE with memory and
IPC>2D option)
(Values under 0 in [ ] are omitted.)
4. Conditions for horizontal and vertical scanning (in 1/1200 inches):
13200 (11∫) < (ULX + W) e 14592 (M3096GX)
When this condition is satisfied, following condition must also be
satisfied (only for CMPII option equipped).
0 < (ULY + L) e 19842 (A3 length) (M3096GX)
For this scanner, the origin of the window is at the location shown below.
The Y0>dot offset affects the vertical scanning direction, and the X0>dot
offset affects the horizontal scanning direction. Take these offsets into
account when specifying the X and Y coordinates of the top left corner of the
window.
X0
Y0
Original document to be read
Origin (ULX, ULY) = (0, 0)
The offset values must be within the ranges listed below. The minimum X0
and Y0 values are within the range for ADF reading because of skewing.
Resolution (dpi) X0 (dots) Y0 (dots)
400 12±12 16±16
300 9±9 12±12
240 8±8 10±10
200 6±6 8±8
4 $ 59