FUJITSU M3093DG - Manual (Page 139)

f Number of blocks: Bytes 1 to 3
The number of logical blocks is specified fitted for the density code and block
length.
f Block length: Bytes 5 to 7
The block length specifies the length of the logical blocks in the block
descriptor in bytes.
Note:
This descriptor is omitted.
c. Mode page
The mode page format is as follows:
Byte 0
1
2
n
Reserved Page code
Page specific parameter
7 6 5 4 3 2 1 0
Page length
to
f Page code: Byte 0
f Page length: Byte 1
f Mode parameter: Byte 2
For definitions, see Section 4.4.12, ™Mode select (6).∫
4 $ 107