FUJITSU M3093DG - Manual (Page 113)

f
d pattern: byte 29
Specifies d pattern number for subwindow. For details, see the
explanation of the SET WINDOW command.
f Outline extraction: byte 2A
Specifies the outlining for the subwindow. For details, see the
explanation of the SET WINDOW command.
f Image emphasis: byte 2B
Specifies the emphasis for the subwindow. For details, see the
explanation of the SET WINDOW command.
f Automatic separation: byte 2C
Specifies the automatic separation for the subwindow. For details, see
the explanation of the SET WINDOW command.
f Variance rate: byte 2E
Specifies variance rate for simplified dynamic threshold. For details,
see the explanation of the SET WINDOW command.
f DTC selection: byte 3E
Byte 3E
Simplified DTC parameter
Reserved
b5
Reserved
DTC SELECTION
00: Default; Simplified DTC, if IPC>2 or IPC>2D optioned.
01: Reserved
10: Reserved
11: Reserved
b7 b6 b2 b4 b3 b1 b0
Note:
Dynamic threshold cannot select for subwindow.
4 $ 81