FUJITSU M3093DG - Manual (Page 172)

Note:
Carbonless papers have the chemical composition which damages the pad and
pick roller. Therefore, note the following remarks
Cleaning: If the miss pick occurs frequently, clean the pad and pick roller in
accordance with the Operator's guide.
Replacement of parts: The life of the pad and the pick roller may be shorter
than the case that PPC document is fed.
Replacement cycle of the pad and the pick roller may by
100,000 sheets or more if the paper quality is good and
cleaning is done well. Before you start the large
quantity reading, check the replacement cycle of them
and prepare pads and pick rollers.
Note:
Paper should be straightened to fit the condition below.
More than
30 mm
Feed direction
Less than
3 mm
Top of the paper
Read surface
More than
30 mm
Feed direction
Less than
5 mm
Read surface
Top of the paper
A $ 4