Appendix c drop>out color, C.1 print density measurement, C $ 1 – FUJITSU M3093DG User Manual

Page 181: Print density measurement

Text mode
Original mode

APPENDIX C

DROP>OUT COLOR

C.1

Print Density Measurement

C.2

Drop>out Color Standard

The drop>out color refers to a printing color visible to people but which cannot be
recognized by the scanner. If characters other than the read characters are printed
in the ground color area, they must be printed in the drop>out color.

C.1

Print Density Measurement

The spectrum band shown in Figure C.1 is used to measure print density.

The measurement must be made in one of the following ways :

a. A light source using fluorescent material G54 is used.

b. Macbeth PCS meter PCMII is used, which requires special filter.

C $ 1