Fortinet FortiGate 4000 - Manual (Page 61)

FortiGate-4000 Installation and Configuration Guide Version 2.50
FortiGate-4000 Installation and Configuration Guide
61
NAT/Route mode installation
This chapter describes how to install the FortiGate unit in NAT/Route mode. For
information about installing a FortiGate unit in Transparent mode, see
“Transparent
mode installation” on page 69 . For information about installing two or more FortiGate
units in HA mode, see “High availability” on page 81 . For more information about
installing the FortiGate unit in NAT/Route mode, see “Planning the FortiGate
configuration” on page 54 .
This chapter describes:
• Preparing to configure NAT/Route mode
• Using the setup wizard
• Using the command line interface
• Completing the configuration
• Connecting the FortiGate unit to your networks
• Configuring your networks
• Completing the configuration
Preparing to configure NAT/Route mode
Use Table 20 to gather the information that you need to customize NAT/Route mode
settings.
Table 20: NAT/Route mode settings
Administrator Password:
Internal interface
IP: _____._____._____._____
Netmask: _____._____._____._____