Assigning a rip filter list to the outgoing filter – Fortinet FortiGate 4000 User Manual
Page 173
RIP configuration
Adding RIP filters
FortiGate-4000 Installation and Configuration Guide
173
Assigning a RIP filter list to the outgoing filter
The outgoing filter allows or denies adding routes to outgoing RIP update packets.
You can assign a single RIP filter list to the outgoing filter.
To assign a RIP filter list to the outgoing filter
1
Go to System > RIP > Filter.
2
Add RIP filter lists as required.
3
For Outgoing Routes Filter, select the name of the RIP filter list to assign to the
outgoing filter.
4
Select Apply.