Fortinet FortiGate 4000 - Manual (Page 26)

26
Fortinet Inc.
Warnings and cautions Getting started
Warnings and cautions
You should be aware of the following cautions and warnings before operating the
FortiGate-4000 antivirus firewall.
Warning
Turning off all power switches may not turn off all power to the FortiGate-4000 unit.
Disconnect the FortiGate-4000 unit from its power source and from any
telecommunications links and networks before installing and removing FortiGate-4000
components or performing other maintenance tasks. Failure to do this can result in
personal injury or equipment damage. Some circuitry in the unit may continue to
operate even though all power switches are off.
The procedures in this chapter are for qualified technical personnel with experience
installing and configuring servers. Read and adhere to all warnings, cautions, and
notices in this chapter.
Package contents
The FortiGate-4000 package consists of two or more packages. One or more of the
packages contains two FortiBlade-4010 modules. Each FortiBlade-4010 module is
capable of functioning as a standalone FortiGate-4000 antivirus firewall or being part
of a FortiGate-4000 HA cluster.
The other package contains the following components:
• FortiGate-4000 chassis which includes the following components (already
installed).
• One KVM switch module (front panel),
• Ten FortiGate-4000 empty slot covers (front panel),
• One management module (rear panel),
• Seven power supply modules (rear panel),
• Four cooling fan trays (rear panel),
• Two pass-through interface modules (FortiGate-4000P rear panel), or
• Two switched interface modules (FortiGate-4000S rear panel),
• One 10/100 out of band management module (rear panel).
• Three power cables,
• One RJ-45 to DB-9 serial cable (only the black header works with the
FortiGate-4000 unit),
• One mounting rail kit,
• One FortiGate-4000 QuickStart Guide,
• One documentation CD containing Fortinet user documentation.
!
Caution: Electrostatic discharge (ESD) can damage FortiGate-4000 components. You should
only perform the procedures described in this chapter from an ESD workstation. If no such
station is available, you can provide some ESD protection by wearing an anti-static wrist strap
and attaching it to a metal part of the FortiGate-4000 chassis.