Sekonic Speedmaster L-858D-U Light Meter User Manual
Page 70
56
5. Measuring
7.
Press the Measuring Button
6
on the side of the meter to
measure the light.
The measured value (F-stop) will be displayed.
While the Measuring Button
6
is being pressed, the meter measures continuously until
the button is released.
When the Measuring Button
6
is released, the measurement is completed. The
measured value at that time will be displayed in the measured value/measuring unit
display area and on the analog scale. (
P24)
Measuring Screen
Viewfinder Display
(in reflected light measurement)
Measured Value (F-stop)
NOTE
●
There are 20 preset of frame rates that can be customized.
●
The T value cannot be set lower than the selected frame rate.