Radio triggering flash mode, P90), Separately) is installed – Sekonic Speedmaster L-858D-U Light Meter User Manual
Page 104: Select radio channel and zone (or group), Riggering, Sold separately is installed), 2-5 radio triggering flash mode
90
5. Measuring
5-2-5
Radio Triggering Flash Mode
(Available when a transmitter sold separately is installed)
The meter detects flash brightness after Measuring Button
6
is pressed to send radio
transmitted signal to radio receiver connected to flash. Displays F-stop value for input ISO
sensitivity and shutter speed. Depending on the radio system in use, the meter controls
the output power of flash units and the modeling lamps with turning ON/OFF.
For details, see the operating manual of the transmitter (sold separately).
Measuring Screen
Measuring Screen
[Measuring
Mode] Icon
Measuring Mode Screen
NOTE
It may not be possible to adjust the light quantity of the modeling lamp depending on the
flash unit or EL-Skyport receiver used.