Sekonic Speedmaster L-858D-U Light Meter - Manual (Page 28)

14
3. Screen Operations
3-3 Screen Transition
The basic screen transition is as follows.
A change in the Measuring Mode or settings can be made on the Measuring Screen.
Power ON
Startup Screen
Measuring Screen
Menu
Menu Button 9
Hardware Setting
Menu Button 9
Power Button 5
Set the Measuring Mode that matches your intended
use.
● Ambient light
● Flash light
● HSS flash
● Flash duration analysis
Measuring Mode
* The modes displayed can be selected in Custom Setting. (  P170)
Set, recall and clear meter/measuring functions to fit your needs.
● Set Average/Contrast Function ● Select Incident/Spot
● Set Exposure Compensation ● Set Filter Compensation
● Set Mid. Tone ● Mid. Tone Clear
● Mid. Tone Recall ● Set Exposure Profile
● Memory Clear ● Memory Recall
● Number of Pre-flash ● Multi Clear
● Flash Duration Analysis t Value ● Radio CH/Zone
Tool Box
Select, edit, and customize meter operations and
displayed measuring functions.
● Set Analog Scale
● Custom Setting
● Edit Exposure Profile
● Edit Frame Rate
● Edit Shutter Angle
● Edit Filter
View information about your meter.
● Product Information
● Regulation
Menu Function
While the meter's power is off, hold down the Menu
Button
9
, then press the Power Button 5 to display
the Hardware Setting Screen.
● User calibration of measured value
● Touch panel display position adjustment
● Reset to Factory settings (default settings)
● User information editing
Hardware Setting