Screen operations, Basic operations, 1 basic operations – Sekonic Speedmaster L-858D-U Light Meter User Manual
Page 23
9
3. Screen Operations
3.
Screen Operations
3-1
Basic Operations
The screen, which is based on the touch panel system, allows you to select a target
menu or item by touching the icon with your fingertip.
●
The LCD backlight is lit when the meter is turned on.
●
The screen dims during measuring or cordless flash standby to eliminate its influence
on measured values, with the exception of the case when measuring is carried out by
the Contrast Function.
●
The brightness of the LCD backlight is set to "Bright" by factory default to enhance the
visibility for outdoor use. To reduce power consumption, specify "Standard" or "Dark" in
Custom Setting.
●
By factory default, the screen dims if the touch panel is not operated for approximately
20 seconds. (time can be adjusted in Custom Functions.
Touch operations
Touch each icon to change the display to a desired screen. (
Measuring Screen
Measuring Mode Screen
* The examples above show the screens that are displayed
when all Measuring Modes are enabled in Custom Setting.
If you touch the arrow icon (
), you can
increase the setting value or change to an item
above.
If you touch the arrow icon (
), you can
decrease the setting value or change to an item
below. Continuing touch of Setting Icon will
successively change the setting value.
Measuring Screen