Sekonic Speedmaster L-858D-U Light Meter - Manual (Page 55)

41
4. Basic Operations
4-2-3 Setting the Measuring Button
6
and Memory Button
7
You can interchange the Measuring Button
6
and Memory Button
7
using Custom
Setting. (  P168)
1. When mainly using the incident light system
"Switching Measure / Memory Buttons" is set to
"Standard" in the Custom Setting menu. (  P157)
NOTE
Each time the meter is powered on, the assignment of the
Memory and Measurement Buttons will be displayed for two
seconds.
2. When mainly using the reflected light system (spot)
If it is inconvenient to operate the Measuring Button in
the reflected light system (spot), you can interchange
the Measuring Button
6
and Memory Button
7
.
Select "Reverse" in "Switching Measure / Memory
Buttons" on the Custom Setting menu. (  P168)
Power Button
5
Memory
Button
7
Measuring
Button
6
Measuring Screen
Measuring
Button
6
Memory
Button
7