Sekonic Speedmaster L-858D-U Light Meter - Manual (Page 42)

28
3. Screen Operations
Tool Box item list
No. Part Name Description
1
Set Average/Contrast
Function
Select ON or OFF. (  P118)
2 Select Incident/Spot Select the light receiving method (Incident/Spot). (  P32)
3
Set Exposure
Compensation
Input an Exposure compensation value. The allowable
exposure compensation range is -9.9 EV to +9.9 EV. (  P125)
4 Filter Compensation
Set filter compensation (you can input the filter compensation
value or select the filter name).
The allowable filter compensation range is -12.0 to +12.0.
(  P127)
5 Set Mid. Tone
Set the mid-tone (from the current measured value or
memorized value) or edit the mid tone value. (  P139)
6 Mid. Tone Clear Delete the mid-tone value. (  P145)
7 Mid. Tone Recall Recall the set mid-tone value. (  P144)
8 Set Exposure Profile Select an exposure profile. (  P147)
9 Memory Clear *1
Delete the measured value that is saved in the memory.
(Not displayed in the Multiple (Cumu.) Flash Mode.)
(  P113)
10 Memory Recall *1
Recall the measured value that is saved in the memory.
(Not displayed in the Multiple (Cumu.) Flash Mode.)
(  P116)
11 Multi Clear *1
Clear the multiple flash reading.
(Displayed in the Multiple (Cumu.) Flash Mode only.)
(  P82 , P89 )
12 Number of Pre-flash
Select the number of pre-flash cancellation times. (  P77 ,
P83 , P93, P98 )
13
Flash Duration Analysis
t Value
Select the analysis t value of the flash duration time. (  P100,
P105 )
14
Radio CH/Zone
(Group)* 2
Select Radio channel and Zone (or Group). (  P90)
*1 When the Multiple (Cumu.) Flash Mode is selected, the displayed information are
different from those shown above.
*2 Displayed if a transmitter (sold separately) is installed.