Sekonic Speedmaster L-858D-U Light Meter - Manual (Page 168)

154
6. Functions
8.
Edit the camera sensitivity characteristics.
Set Camera Sensitivity
Characteristic Screen
Compensation
Value Cursor
Compensation Value
(Synchronized with the cursor)
Clipping Point (-)
Dynamic Range (-) Dynamic Range (+)
Clipping Point (+)
[Cancel] Button
[Default] Button
[OK] Button
1
Compensation value cursor
The compensation value can be set between -5 EV and +5 EV in 0.1 EV step
increments.
While touching the compensation value cursor, slide the cursor to set the
compensation value.
You can also touch the Minus or Plus Icon (
or ) to change the value in
0.1 EV step increments each time it is clicked.
2
Dynamic range and clipping point
The dynamic range and clipping point can be set between -10 EV and +10 EV in 0.1 EV
step increments. However, the clipping point cannot be set over the dynamic range.
Dynamic range (-) ≤ Clipping point (-) ≤ Clipping point (+) ≤ Dynamic range (+)
While touching each cursor, slide the cursor to set the dynamic range (-), clipping
point (-), clipping point (+), and dynamic range (+).
To edit the dynamic range, touch the Minus or Plus Icon (
or ).
To edit the clipping point, touch the Minus or Plus Icon ( or ).
3
Default
If you touch [Default] Button, the profile of the selected ISO sensitivity is reset to the
default. To reset all the profiles to their defaults, use "Data Transfer Software", which
is a convenient tool.
9.
Touch [OK] Button.
The display returns to the ISO sensitivity selection on Edit Exposure Profile Data
Screen.
Touch [Cancel] Button to return to the ISO sensitivity selection on Edit Exposure Profile
Data Screen without changing any data.