Sekonic Speedmaster L-858D-U Light Meter - Manual (Page 67)

53
5. Measuring
4.
Set the shutter speed on the [T] Icon. (  P197)
5.
Set the aperture on the [F (f-stop)] Icon. (  P198)
Measuring Screen
Setting Value
6.
Press the Measuring Button 6 to measure the light on the side of
the meter.
The measured ISO sensitivity value will be displayed.
While the Measuring Button
6
is being pressed, the meter measures continuously until
the button is released.
When the Measuring Button
6
is released, the measurement is completed. The
measured value at that time will be displayed in the measured value/measuring unit
display area and on the analog scale. (
 P22 , P24)
Measuring Screen
Viewfinder Display
(in reflected light measurement)
Measured Value (ISO Sensitivity)
NOTICE
In the T+F (Shutter Speed/F-stop) Priority Mode, the ISO sensitivity (measured
value) can be stored in the memory, but cannot be displayed on the scale.