Sekonic Speedmaster L-858D-U Light Meter - Manual (Page 206)

192
7. Hardware Setting
3.
Perform this procedure twice at each of four positions.
After being touched, the white cross cursor is displayed at another position.
The cursor is displayed twice in four corners in the following order: top left → bottom
right → top right → bottom left → top left → bottom right → top right → bottom left.
Repeat this procedure in sequence.
Adjust Touch Panel Screen
4.
Check the adjustment result.
When you have touched the cursor in all the corners, the "Data is determined by
pressing the "OK"." message is displayed.
Adjust Touch Panel Screen
[Cancel] Button [OK] Button
5.
Touch [OK] Button.
Finish the setting, and the display returns to the Hardware Setting Screen.
Touch [Cancel] Button to return to the Hardware Setting Screen without applying the
touch panel adjustment.