Sekonic Speedmaster L-858D-U Light Meter - Manual (Page 125)

111
6. Functions
6-1-1 How to Save Values in the Memory
Operation
1.
Press the Measuring Button 6 .
The measured value at that time will be displayed.
In Ambient Mode, while the Measuring Button 6 is held down, the meter continues to
make measurements.
When the Measuring Button 6 is released, the measurement ends. The measured
value at that time will be displayed in the measured value/measuring unit display area
and on the analog scale. (
 P22 , P24)
2.
Press the Memory Button 7 .
The measured value is saved in the memory. The measured value saved in the
memory is displayed as a dot on the analog scale.
3.
Repeat Steps 1 and 2.
This meter can store up to nine measured values in the memory.
Measuring Button
6
Memory Button
7
Measuring Screen Measuring Screen
Measured
Value
(F-stop)
Measured
Value
(F-stop)
Memory
Count
Each measured value (F-stop)
saved in the memory