Yamaha HTR-5950 User Manual
Yamaha Acoustics
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Table of contents
Document Outline
- IMPORTANT SAFETY INSTRUCTIONS
- FCC INFORMATION (for US customers)
- CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.
- CONTENTS
- FEATURES
- GETTING STARTED
- CONTROLS ÄND FUNCTIONS
- © STANDBY/ON
- © Front panel display
- © PRESET/TUNING, EDIT
- © FM/AM
- © A/B/C/D/E, NEXT
- © PRESET/TUNING/CH <1 / >, LEVEL +/-
- (8) MEMORY (MAN’UAUTO FM)
- ® TUNING MODE (AUTO/MAN’L)
- iio) VIDEO AUX jacks
- (11) VOLUME
- (g; BASS/TREBLE+/-
- @ PROGRAM O/>
- ig INPUT MODE
- INPUT selector
- @ MULTI CH INPUT
- i@ n PHONES (SILENT CINEMA) jack
- igl SPEAKERS A/B
- STRAIGHT (EFFECT)
- ijS) TONE CONTROL
- 0 Infrared window
- @ CODE SET
- 0 Input selector buttons
- 0 Sound field program selector buttons
- 0 SPEAKERS
- 0 ENHANCER
- 0 LEVEL
- jo; TRANSMIT indicator
- ji) STANDBY
- j|) POWER
- SLEEP
- (14) MULTI CH IN
- ® VOLUME +/-
- ® Component selector switch
- AMP
- SOURCE
- TV
- ® STRAIGHT (EFFECT)
- ® NIGHT
- ® SET MENU
- ® DISPLAY
- (i) Numeric buttons
- 0 Decoder indicators
- 0 ENHANCER indicator
- 0 Sound field indicators
- 0 VIRTUAL indicator
- 0 Input source indicators
- 0 DOCK indicator
- 0 SILENT CINEMA indicator
- 0 CINEMA DSP indicator
- 0 AUTC indicator
- 0 TUNED indicator
- 0 STEREC indicator
- 0 MEMCRY indicator
- (1^ VOLUME level Indicator
- PCM indicator
- (g) STANDARD indicator
- )|) SP A B indicators
- (g) Headphones indicator
- (g) NIGHT indicator
- (i|) HiFI DSP indicator
- @1 Multi-information display
- (21) SLEEP indicator
- (g) MUTE indicator
- g 96/24 indicator
- g Input channel indicators
- g) LFE indicator
- ® Video component jacks
- (2) Audio component jacks
- ® MULTi CH INPUT jacks
- ® DIGITAL OUTPUT jack
- (6) DIGITAL INPUT jacks
- (8) DOCK terminal
- ® COMPONENT VIDEO jacks
- (jcf Antenna terminals
- (11) Speaker terminals
- (iD AC OUTLET(S)
- CONNECTIONS
- Front left and right speakers (FL and FR)
- FRONT terminals
- CENTER terminals
- SURROUND terminals
- SURROUND BACK terminals
- Audio jacks and cable plugs
- Video Jacks and cable plugs
- AUDIO jacks
- DIGITAL AUDIO COAXIAL jacks
- DIGITAL AUDIO OPTICAL jacks
- VIDEO jacks
- S VIDEO jacks
- COMPONENT VIDEO jacks
- PORTABLE jack
- Do not connect this unit or other components to the AC power suppiy untii aii connections between components are complete.
- Do not connect this unit or other components to the AC power supply until all connections between components are complete.
- Do not connect this unit or other components to the AC power suppiy until all connections between components are complete.
- Be sure to turn off the volume of this unit and other components before making connections.
- Press and hold the tab of the AM ANT terminal.
- Insert one of the AM loop antenna lead wires into the AM ANT terminal.
- Release the tab of the AM ANT terminal back into place.
- Repeat steps 2 through 4 to connect the other lead wire to the GND terminal.
- Memory back-up
- BASIC SETUP
- 4 Press ENTER to enter “BASIC SETUP”.
- 1 Set the component selector switch to AMP.
- 2 Press SET MENU to enter “SET MENU”.
- 3 Press /\ / sy to select “BASIC SETUP”
- Press /\ / NA to select “ROOM” and then < / > to select the desired setting.
- 6 Press N/ to select “SUBWOOFER” and then < / > to select the desired setting.
- 8 Press V- to select “SETUP” and then < / > to select the desired setting.
- 9 Press ENTER to confirm your selection.
- 10 Press < / > to select the desired setting.
- 12 Press /\ / V" to select a speaker and then < / > to adjust the balance.
- 11 Press ENTER to confirm your selection.
- 13 Press SET MENU to exit from “BASIC SETUP”.
- PLAYBACK
- USING AUDIO FEATURES
- 1 Rotate the INPUT selector on the front panel to select the desired input source.
- start playback on the selected source component or select a broadcast station.
- Press < / > on the remote control to adjust the speaker output level.
- Press ENTER on the remote control when you have completed your adjustment.
- 2 Press < / > on the remote control to select the desired effect level.
- USING VIDEO FEATURES
- 1 Set the component selector switch to AMP and then press SET MENU on the remote control.
- 2 Press V repeatedly to select “SIGNAL INFO” and then press ENTER.
- Signal format l-uf
- Sampling frequency Sl lilFLIHi::!
- Channel (iiHijr-ihllEL
- Bit rate l:::!l3"|2M"rE;
- 3 Press SET MENU on the remote control again to exit from “SET MENU”.
- 1 Turn on the video monitor connected to this unit.
- Full display
- ENJOYING SURROUND SOUND
- RECORDING
- FM/AM TUNING
- Press PRESET/TUNING/CH <3 /> once to begin automatic tuning. * •
- 1 Rotate the INPUT selector to select “TUNER” as the input source.
- 2 Press FM/AM to select the reception band,
- Press PRESET/TUNING/CH
to tune into the desired station manually. - 1
- 1 Rotate the INPUT selector to select “TUNER” as the input source.
- Press and hold MEMORY (MAN’L/AUTO FM) for more than 3 seconds.
- 2 Press FM/AM to select “FM” as the reception band.
- 1 Tune into a station automatically or manually.
- 2 Press MEMORY (MAN’L/AUTO FM).
- Press MEMORY (MAN’L/AUTO FM) while the MEMORY indicator is flashing.
- Repeat steps 1 through 5 to store other
- 1 Select preset station “E1” using A/B/C/D/E and PRESET/TUNING/CH
. - 2 Press and hold EDIT for more than 3 seconds.
- 3 Select preset station “A5” using A/B/C/D/E and PRESET/TUNING/CH .
- 4 Press EDIT again.
- XM® SATELLITE RADIO TUNING
- (D SEARCH WIODE
- (2) CATEGORY
- ® PRESET/TUNING/CH
- (4) MEMORY (iWAN’IJAUTO FM)
- 0 XM
- i2) Numeric buttons
- 0 XM MEMORY
- (6) SRCH MODE
- © DISPLAY
- 2 Search for a channel by using one of the XM Satellite Radio search modes.
- 2 Press MEMORY on the front panel (or XM MEMORY on the remote control).
- When the channel category is displayed:
- Press DISPLAY on the front panel or on the remote control.
- When the artist name / song title is displayed:
- SOUND FIELD PROGRAMS
- SET MENU
- i
- 2 Press /\ / V- to select “MANUAL SETUP”
- 3 Press ENTER to enter “MANUAL SETUP”.
- 1 Set the component selector switch to AMP and then press SET MENU to enter “SET MENU”.
- 4 Press / V- repeatedly and then press
- ENTER to select and enter the desired menu.
- 7 Press SET MENU to exit from “SET MENU’
- Surround back speakers
- Crossover i;:FiC!SS OyiER
- Speaker distances
- For OPTICAL INPUT jacks 2, 3 and 4
- Repeat steps 1 through 3 to rename each input source.
- Press SET MENU on the remote control to exit from “INPUT RENAME”.
- Video conversion UIDIEO CONU::
- Speaker B setting i:>F' B
- ADVANCED SETUP
- REMOTE CONTROL FEATURES
- 2 Press CODE SET using a ballpoint pen or a similar object.
- 1 Press TUNER to select “TUNER” as the input
- source.
- 1 Press CODE SET using a ballpoint pen or a similar object.
- 2 Press CODE SET using a ballpoint pen or a similar object.
- Press the numeric buttons to enter the code number “00001” or “00002”.
- Press the numeric buttons to enter the code number “81916” or “81917”.
- 1 Press XM to select “XM” as the input source.
- 2 Press CODE SET using a ballpoint pen or a similar object.
- 1 Press CODE SET using a ballpoint pen or a similar object.
- Press the numeric buttons to enter the code number “81918” or “81919”.
- Press the numeric buttons to enter the code number “9981”.
- USING iPod®
- RESETTING THE SYSTEM
- GLOSSARY
- SPECIFICATIONS