Yamaha HTR-5950 - Manual (Page 91)

SET MENU
■ Zone set D)I1UL..TI ZONE 5tJ
Use this feature to specify the location of speakers
connected to the SPEAKERS B terminals of this unit.
XM Radio setting Ei
(U.S.A. model only)
Speaker B setting i:>F' B
Use this feature to select the location of the front speakers
connected to the SPEAKERS B terminals.
Choices:
FRONT, ZONE B
• Select “FRONT” to turn on or off SPEAKERS A and B
when the speakers connected to the SPEAKERS B
terminals are set in the main zone.
• Select “ZONE B” if the speakers connected to the
SPEAKERS B terminals are set in another zone. If
SPEAKERS A is turned off and SPEAKERS B is
turned on, all the speakers including the subwoofer in
the main zone are muted and this unit outputs sound at
the SPEAKERS B terminals only.
Notes
• If you connect headphones to the PHONES jack of this unit, the
sound is output from both headphones and the SPEAKERS B
terminals when “SP B” is set to “ZONE B”.
• If a DSP program is selected when “SP B” is set to “ZONE B”,
this unit automatically enters the Virtual CINEMA DSP mode
(see page 43).
E)i »!0 SEI
• ISSfal
EÈNTER]ÎFÏt.urfi
XM Radio information display time Nil D1SÏÏ....HV
Use this feature to set the time to display the XM Satellite
Radio information in the OSD after pressing DISPLAY on
the front panel or on the remote control.
Choices: ON,
10S, 30S, OFF
• Select “ON” to display the XM Satellite Radio
information while this unit is tuned into a channel.
• Select “lOS” to display the XM Satellite Radio
information for 10 seconds.
• Select “30S” to display the XM Satellite Radio
information for 30 seconds.
• Select “OFF” not to display the XM Satellite Radio
information.
XM Radio antenna i-;rl !4NTIEHN m
Use this feature to check the current reception level of the
XM Connect-and-Play digital antenna accessory
connected to the XM jack of this unit (see page 52). For
the best reception, orient the XM Connect-and-Play digital
antenna accessory .so that a value of 60% or more is
displayed here.
Display status: NONE, Oto lOOUc
: Notes
• “NONE” is displayed if the XM Connccl-and-Play digital antenna
accessory is not connected to this unit. In this case, check the
antenna connections (see page
52).
• The “XM ANTENNA" parameter cannot be adjusted by using
the remote control. Instead, you need to adjust the orientation of
the XM Connect-and-Play digital antenna accessory connected
to the XM jack of this unit for a better percentage of the
reception level.
XM Radio information display scroll SCROLL
Use this feature to set whether to display the XM Satellite
Radio information in the front panel display in a
continuou.s manner or by 14 alphanumeric characters at
once (see page 61).
Choices:
CONT, ONCE
• Select “CONT” to display the XM Satellite Radio
information in the front panel display in a continuous
manner.
• Select “ONCE” to display the XM Satellite Radio
information in the front panel display by 14
alphanumeric characters at once.
87