Yamaha HTR-5950 - Manual (Page 97)

REMOTE CONTROL FEATURES
Setting library codes
You can operate multiple YAMAHA receivers or
amplifiers in the same room with the supplied remote
control simultaneously. Set the appropriate library code to
select and operate the desired component with the
supplied remote control.
■ Setting remote control AMP ID library
codes
Select one of the following codes to set the remote control
AMP ID library code for the component you want to use.
■ Setting remote control TUNER ID library
codes
Select one of the following codes to set the remote control
TUNER ID library code for the component you want to
use.
1 Press TUNER to select “TUNER” as the input
source.
1 Press CODE SET using a ballpoint pen or a
similar object.
The TRANSMIT indicator on the remote control
flashes twice.
2 Press CODE SET using a ballpoint pen or a
similar object.
The TRANSMIT indicator on the remote control
flashes tw ice.
TRANSMIT
Flashes
TRANSMIT
;o::
Flashes
Press the numeric buttons to enter the code
number “00001” or “00002”.
The TRANSMIT indicator on the remote control
flashes twice, and the AMP ID library code is
changed.
f,TEf!EO :MUSId • EHTEffTAIM . I.1W/IE-
¿•’¿TU fiVMft. DIRl'C/ST,
'.MICTIT hUTAiriHÏ
.■..fîifv,.
.!'Hln-,r
TRANSMIT
"O"
Flashes
Press the numeric buttons to enter the code
number “81916” or “81917”.
The TRANSMIT indicator on the remote control
flashes twice, and the TUNER ID library code is
changed.
STGI ой З : MU-W.E'NTErjT/tJN- tildyÍE ..I
.biÉtrSiíftj:;
.. .... ... .. .
awhiiîAnrj.-'SELEc.;T' . ektóí ; iir .
: AfA .. i' «.'i V .t /. '};.
' .>■
■ nrrá
TRAÍISMIT
Flashes
AMP ID
librnrycodo
liBiaiiBijg
Function
Remote
control AMP
ID ‘2
TUNER ID
library code
liliglllitti
Function
Remote
control
TUNER ID '2
00001
(initial setting)
To operate this unit using
the default code. IDl
(initial setting)
81916
(initial setting)
To operate this unit using
the default eode. iDl
(initial setting)
00002
To operate this unit using
an alternative code.
ID2 81917
To operate this unit using
an alternative code.
ID2
The remóle control setting
'■ The setting of this unit (see page 89)
The remote control setting
The setting of this unit (see page 89)
Notes
• You need to set the coifespoiiding remote control AMP ID
of this unit ill the advanced setup (see page 89).
• When using rnidtiple YAMAHA reeeivers/ainplitiers, you
may be able to operate the other components
simultaneously with the default code setting. In this case,
set one of the alternative codes to operate this unit
separately.
Notes
• You need to set the corresponding remote control TUNER
ID of this unit in the advanced setup (see page 89).
• When using multiple YAMAHA receivers/arnplificrs, you
may be able to operate the other components
simultaneously with the default code setting. In this case,
set one of the alternative codes to operate this unit
septimtely.
93