2 press /\ / v- to select “manual setup, 3 press enter to enter “manual setup, 4 press / v- repeatedly and then press – Yamaha HTR-5950 User Manual
Page 81: Enter to select and enter the desired menu, Using set menu
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SET MENU
Using SET MENU
Use the remote control to access and adjust each
parameter.
iui ;vj: i:0-
lii'
■ s:;;T
idiji U;;i- -PP; .■
(U.S.A. model)
i
.1J
-
2-6
2
Press /\ / V- to select “MANUAL SETUP”
»BRSÏC SETUP
= mNLIfiL. SETUP
= SIGNr4L INFO
[,ii.]/CT]:i UF'/Dciyn
[ h . N l t , K ] S t , n i e r
3
Press ENTER to enter “MANUAL SETUP”.
The “MANUAL SETUP” display appears in the
OSD.
• You can change the “SET MENU” ptirameters while this unit is
reproducing sound.
• If you press one of the sound field program selector buttons
during the “SET MENU” operation, the “SET MENU”
operation is canceled.
• Repeat the following procedure to select and adjust each
parameter setting,
• Press RETURN to return to the previous meitti level.
Note
You cannot change some “SET MENU” parameters wfien
“NIGHTCINEMA” or “NIGHTMUSIC" is selected as the night
listening mode (see page 3d).
1
Set the component selector switch to AMP
and then press SET MENU to enter “SET
MENU”.
The top “SET MENU” display appears in the OSD.
AMP
m
&>
i
SET MENU
jMENlL
SRCH MODi
4
Press / V- repeatedly and then press
ENTER to select and enter the desired menu.
The following displays are examples where “SOUND
MENU” is selected.
> +
77