Yamaha HTR-5950 - Manual (Page 41)

USING AUDIO FEATURES
Set the component selector switch to AMP
and then press ENHANCER on the remote
control repeatedly to select the desired
Compressed Music Enhancer mode.
The following display is shown in the OSD and the
ENHANCER indicator lights up in the front panel
display.
m
O)
t
ENHANCER
- EHHflHCER -
/ I \
Lights up
Choices: 2ch Stereo, 6ch Stereo, Off
• Select ”2ch Stereo” to play back compression
artifacts in 2-chaniiel stereo.
• Select ‘‘6ch Stereo” to play back compression
artifacts in 6.1-channel stereo.
• Select ”Off” to turn off the Compressed Mu.sic
Enhancer mode.
Note
When you select ‘■Off; this unit returns to the previously
selected sound field program.
2 Press < / > on the remote control to select the
desired effect level.
Selecting the MULTI CH INPUT
component
Use this feature to select the component connected to the
MULTI CH INPUT jacks (see page 2.S) as the input
source.
Press MULTI CH INPUT on the front panel (or
MULTI CH IN on the remote control) so that
“MULTI CH INPUT” appears in the front panel
display.
inULII LT1 in
Of
Front panel
♦
Remote control
Note
When “MULTI CH INPUT" is shown in the front panel display,
no other source can he played. To select another input source with
the INPUT selector on the front panel (or one of the input selector
buttons), press MULTI CH INPUT (or MULTI CH IN on the
remote control) so that “MULTI CH INPUT” disappears from the
front panel display.
Choices: HIGH, LOW
• Select “HIGH” for a high effect level.
• Select “LOW” for a low effect level.
Note
Set the effect level to “HIGH" or “LOW" according to the
characteristics of a source. The high-frequency signals of
some sources may be emphasized too much. In this case, se
the effect level to “LOW".
37