Great Plains DICKEY-john MVT Monitor Operator - Manual (Page 96)

OPERATOR’S MANUAL
IntelliAg MVT
11001-1643-201401
CUSTOMIZING THE WORK SCREEN / 87
GROUND SPEED
Ground Speed displays the current ground speed of the tractor in miles per
hour (Kph). The ground speed source is defined during the Ground Speed
Calibration setup.
This data item also displays the implement status using an up/down arrow
next to the tractor icon.
TOTAL AREA
NOTE: Data Items on the Main Work
screen with a check box allows
the number to be reset to zero. Total Area displays the area covered by the implement in acres (Ha). Total
area is calculated using the Implement Width parameter entered on the
Row Setup screen. Area accumulates for seeding when seeds are
detected on at least one seeding row and the ground speed is above the
shutoff speed parameter entered on the Ground Speed Calibration
screen. This accumulator is independent of any other area accumulator and
can be reset to 0.0 at any time. Current area is retained after power down. If
no rows are configured, the Total Area Accumulator will use the largest
channel width.
FIELD 1 AREA
Field 1 Area displays the area covered by the implement in acres (Ha). Field
1 Area is calculated in the same manner as Total Area. This accumulator is
independent of any other area accumulator and can be reset to 0.0 at any
time. Current area is retained after power down.
FIELD 2 AREA
Field 2 Area displays the area covered by the implement in acres (Ha). Field
2 Area is calculated in the same manner as Total Area. This accumulator is
independent of any other area accumulator and can be reset to 0.0 at any
time. Current area is retained after power down.