Great Plains DICKEY-john MVT Monitor Operator - Manual (Page 88)

OPERATOR’S MANUAL
IntelliAg MVT
11001-1643-201401
CUSTOMIZING THE WORK SCREEN / 79
CUSTOMIZING THE WORK SCREEN
Data items are the selectable parameters that display on the Main Work
screen that monitor control channels, rate targets, individual row
performance, spacing, population, ground speed and coverage area during
operation.
What data items appear on the Main Work screen can be selected and
placed in any position.
– The display is functionally divided into 2 columns and 6 rows.
– Any data item can be placed in any position.
– Duplicate data items can be configured on a single display if
desired.
– Up to three display screens can be configured.
– Some data items display on an entire row.
To Select Data Items:
1. At the Top Menu screen, press the Next Page button.
2. Press the Screen Cfg button.
Figure 66
Top Menu Screen
3. Use the rotary knob to select a yellow input box.
4. Push in the knob to select and display data item choices.
5. Scroll using the knob and push in to select.
6. Press the Next Screen button to create 2 additional work screens.