Great Plains DICKEY-john MVT Monitor Operator - Manual (Page 35)

OPERATOR’S MANUAL
IntelliAg MVT
11001-1643-201401
26 / VIRTUAL TERMINAL FEATURES
LANGUAGE
The terminal is equipped with numerous languages that displays the user
screens in the language selected.
1. Language choices are identified by the country flag. An abbreviated
identifier of the selected language displays next to the language
window.
2. Decimal point choices are available to display unit of measure (period
or comma format).
3. To save the language and decimal changes made at this screen, use
the rotary dial to highlight the ISOBUS button.
4. Push in the rotary dial to save changes. The changes can be verified
by returning to the Main Work screen. If the ISOBUS button is not
selected and the rotary dial pressed, the changes will NOT be saved.
The abbreviated language when saved will appear next to the ISO Bus
button.
NOTE: Remember to complete the
final step of highlighting the
ISOBUS button and pushing in
the rotary dial to accept saved
changes. Figure 25
Language
UNIT MEASUREMENT
Unit measurement settings are adjustable to regional preferences. Units
include:
• Length
• Area
• Volume
• Mass
• Temperature
• Air pressure
• Force
To Change Unit Measurement:
1. Unit measurement choices are identified by the country flag. Select the
appropriate region flag.
2. To save the unit measurement changes made at this screen, use the
rotary dial to highlight the ISOBUS button.
3. Push in the rotary dial to save changes. The changes can be verified
by returning to the Main Work screen. If the ISOBUS button is not
selected and the rotary dial pressed, the changes will NOT be saved.