Ground speed, Operator’s manual, Setup – Great Plains DICKEY-john MVT Monitor Operator User Manual
Page 82
OPERATOR’S MANUAL
IntelliAg MVT
11001-1643-201401
GROUND SPEED / 73
GROUND SPEED
SETUP
Ground Speed Setup determines:
•
The input source and ground speed sensor type
•
The manual default ground speed (only displays when manual is
selected as source).
•
Shutoff speed
•
Minimum override
•
Ground speed constant
•
Master switch timeout
•
Fail alarm delay
•
Implement Lift
•
Precharge speed (displays only when the Precharge time is greater
than 0 mph (0 kmh) on a Control Channel Setup screen)
To Set Ground Speed:
1. Press the Speed Set button.
2. Use the rotary dial to highlight the yellow input box.
3. Push in the rotary dial to select or enter a value.
4. Push in the rotary dial to accept.
Figure 62
Speed Set Screen
SOURCE
Selects the type of ground speed sensor used and where the sensor’s input
is located on the system.
- Heavy Reset Springs Kit (3 pages)
- Single Section Yield-Pro Implement PTO Pump System or Fan Update (82 pages)
- Flex Harrow Light Kit (2 pages)
- Planter Hopper Lid Latch Kit (4 pages)
- YP Drive Shaft Update Kit (3 pages)
- 30-Foot 3-Section Vintage Drill (28 pages)
- Uni-Press (20 pages)
- White Planters 6100 Planter Seed-Lok (17 pages)
- 1200TM (3 pages)
- PM400 Monitor Operator (60 pages)
- Raven 440 (60 pages)
- Verti-Till Ripper VT 03 Hyddepth Convert (5 pages)
- Native Grass Cup Enhancement Kit (7 pages)
- Raven G1 Autoboom Assy (2 pages)
- 8030-3P Wide Row Planters (28 pages)
- Terra-Tine Row Cleaner (31 pages)
- S3T (22 pages)
- Eliminator Kit (7 pages)
- Yield-Pro 1625 Planter 2004 (13 pages)
- Utility Coulter & Vantage I-20 Fertilizer Coulters (21 pages)
- Electric Clutch Package (108 pages)
- Seed-Lok (4 pages)
- Yield-Pro Planters Refuge Hopper Kit (6 pages)
- Yield-Pro Planter Manifold Air Release Kit (3 pages)
- EHPR Valve Calibration (6 pages)
- Full Press Drill Post Conversion (7 pages)
- Fertilizer Arm Kits (20 pages)
- PTO Kits 2-3-Section (100 pages)
- Hydraulic Depth Stop (4 pages)
- Seed Flap and Tube Kit 00 Series Openers (2 pages)
- Yield-Pro Unit-Mount Coulter (16 pages)
- Trash All Series Openers (2 pages)
- 705NG (8 pages)
- Inline Ripper Gauge Wheel Jack Kit (7 pages)
- DICKEY-john IntelliAg Planter-Drill Control L1 (37 pages)
- Auto Reset Bolt Retainer (3 pages)
- Universal Acre Meter (12 pages)
- Air-Pro Planters Actuator Field Kit (6 pages)
- CDS-JohnBlue NGP Series Pumps (24 pages)
- Yield-Pro Planter Seed Tube (6 pages)
- 1515 Marker Option (10 pages)
- Frame-Mounted Coulters (6 pages)
- Shank Holder Clamp Bolt Update (1 page)
- PD8070 (10 pages)
- YP Fertilizer Ground Drive Update (12 pages)